If you take good care of the whirlpool tub, it can easily last for 20-50 years. This lifespan was based on a study conducted by the National Association of Home Builders (NAHB). Installing a quality whirlpool tub is not the only thing that you need to worry about. Finding authentic products is not hard as Letta London is your ultimate whirlpool bath stop. After investing in premium products, you also need to ensure quality care and maintenance of bath components. 

The life expectancy of different components in a whirlpool bath depends upon the usage. With proper care and periodic maintenance, you can improve the lifespan and performance of your installation. 

Whirlpool Care and Maintenance

There are no special requirements for the maintenance of the whirlpool bath as it requires the same care as any other bathroom or shower in your home. But some components like the circulation system are not visible, so you have to take some extra care to prevent the growth of bacteria in those areas. Remember that whirlpools are like little swimming pools. So, it is important to control excess water and keep your bath clean.

The main thing in the maintenance of a whirlpool is ensuring the circulation system, which usually remains hidden. In this system, there is no filter, and the pump alone can handle the cleaning of water. The circulation system should be checked once every few weeks to remove smelly scum and bacteria from the pipes. If you are not capable of removing the dirt from the pipes, then call an authorized plumber for help.

Maintenance Tips for Whirlpool Baths and Tubs

So you are aware of the maintenance of your whirlpool bath, the next thing is knowing how to maintain and clean the components. Here are some useful tips that you can use while maintaining a bath:

1. Smooth Drainage System

One of the most important things in maintaining a bath is ensuring that the drainage system is working properly. Once the water drains out, what happens? It goes straight into the drain, and as it becomes unclean, it also increases the chances of bacterial growth and odor.

To help in effective water circulation through pipes and tubs, check for leaks regularly to detect any blockages or cracks. For cleaning purposes, remove all materials from drainage pipes before draining water completely.

2. Avoid using Acidic Cleaning Agents

One of the most annoying things that happen when you don’t clean your drainage system is lime deposits. These lime deposits are normally present in the drain pipes, and once your bath water contacts them, it creates unpleasant odors.

To get rid of these lime deposits, attach a cleaning agent such as vinegar or lemon juice to drain pipes. But do not use any cleaning agents that contain acid; instead, consult plumbing for help.

3. Unbalanced Water Level

The water level in your bath should be balanced so that no water is standing too high or low at any point. If the water level is unbalanced, it shows that the circulation system is not working properly and may cause clogging or leakage. For proper water level, install a digital water level gauge at the bottom of your tub. This will help in maintaining an equal water level all the time.

4. Use whitener to keep your bath clean

This tip is mainly for hard water system as soft water baths doesn’t require much cleaning. To make your bath white, use whitener powder every morning before you begin your day to keep it shiny and white all the time. You can also use other recommended cleaners to sanitize your tub and bath. 

5. Always Install Quality Whirlpool Tub

It is not just about buying a whirlpool bath. You need to ensure that you are installing a quality bath by using authentic products from genuine dealers in your city. Contact Letta London, the finest north London bathroom showroom, to find the best products for your home. They offer excellent service, installation and maintenance of top-quality whirlpool baths.

6. Use Drain Cover

Most whirlpool bath manufacturers provide drain cover with every installation that helps in containing waterborne contaminants inside your tub. So use these covers whenever you are performing maintenance tasks inside your tub, as these covers prevent water from dripping into the bathroom area and creating harmful bacteria.

7. Keep Air Valve Shut

The Air valve is one of the most important components that are used for cleaning and filling the bath. Sometimes, valves work loosely, and it may create leaking issues if not closed properly. 

To avoid such kinds of accidents, keep your air valve shut all the time during bath maintenance. You can take the help of a twist tie or screw to keep it closed in an effective manner.

8. Don’t use Bleach for Chrome and Gold Parts

The Whirlpool bath is made of copper and chrome. But to get a shiny and bright bath, you need to scrub it with bleach. It will weaken the metal components and decrease the lifespan. Don’t use bleach for chrome or gold parts. 

Bleach can remove the shiny surface, and the components will look dull due to contact with bleach. Ask the bathtub company for the recommended cleaners so that you don’t have to worry about damaging the surface of the tub. 

Conclusion

Although maintenance is not a tough task, it is very important for you to keep your bath clean, safe and healthy in the long run. If you follow all the steps mentioned above, you can enhance the life of your whirlpool bath by keeping them in the best condition. If any issue arises, then you can consult with professional plumbers as they have certified expertise in maintaining high-quality baths and tubs. 

The tub section of a whirlpool bathroom system should be maintained as it is essential to ensure that it works properly and safely. Tub section maintenance is very similar to the drainage system of a whirlpool bath. If you have an outdated or faulty tub section, it can cause loss of water and lead to leakage.